- Which is better Fibre to the node or curb?
- How fast is FTTC?
- How long does it take to install FTTC?
- Can I connect any router to any modem?
- How do I increase my FTTC speed?
- How can I hide my router and modem?
- Is the NBN box a modem?
- Do I need a modem or can I just use a router?
- Is FTTP better than FTTC?
- Can I move my NBN modem?
- How do I know if my modem is NBN compatible?
- Do all routers work with all modems?
- Can you just plug in a new modem?
- Is a router the same as a modem?
- How do I get internet without a modem?
- How do I know if I have FTTP or FTTC?
- Is FTTC vdsl2?
- Do I need a technician to install my NBN?
- Does FTTC need connection box?
- Can you just buy a router and have internet?
- Is FTTC any good?
Which is better Fibre to the node or curb?
First it was the home, then it was the node and now it is the curb.
It enables fibre to be closer to the home, compared to fibre to the node (FTTN) technology, which uses the existing copper network for a longer stretch underground before it gets to the home, causing slower speeds..
How fast is FTTC?
How fast is fibre broadband? Fibre to the Cabinet (FTTC) broadband comes in three main variants which offer a downstream line connection speed of 80 meg (80 Mbps), 55 meg (55 Mbps) or 40 meg (40 Mbps), but the actual maximum throughput speed of the service will be slightly lower than this at around 76 / 52 / 38 Mbps.
How long does it take to install FTTC?
For a standard installation, this is between 15 minutes to a couple of hours while the technician completes the work. This may take longer if there is extra work required. We also recommend that you have your supplied NBN FTTC broadband router ready, so it can connect once you’re cut-over to NBN FTTC .
Can I connect any router to any modem?
You can use any wireless router you want, but the modem you purchase has to be approved by your ISP to function with their network.
How do I increase my FTTC speed?
Increase FTTC SpeedYou could bond 2 or 3 FTTC connections together, this is known as FTTC bonding.You could ask your provider to apply G. Fast to your line. G Fast is a new type of technology applied to the copper line enabling fibre speeds over copper wires.
How can I hide my router and modem?
Routers, Modems, and Cable Boxes Consider a hollowed-out book, a file holder, or a decorative box if you’re going with the hide option. Surrounding a router or cable box with a stack of books, magazine, or other accents can help it blend in with your decor if you are going for the disguise option.
Is the NBN box a modem?
Yep, your NBN NTD box is your “modem” – all you need to do is connect an ethernet cable from the UNI-D port on the NTD box to the WAN input of your new router.
Do I need a modem or can I just use a router?
A router connects your devices to each other and, in hard-wired setups, to the modem. The router connects to your modem and then to your devices (laptops, smart TVs, printers, etc.) … However, a router doesn’t need to connect to a modem to function. You can choose to create a LAN without Internet access.
Is FTTP better than FTTC?
Is FTTP better than FTTC broadband? Absolutely, yes. FTTP is capable of far higher speeds and typically also offers symmetrical speeds where your upload speed is the same as your download speed. FTTC on the other hand has a much lower speed ceiling and upload speeds are typically a fraction of download speeds.
Can I move my NBN modem?
Yes, however nbn prefers the nbn™ connection box and power supply is connected to fixed power point where possible. … If you need to have the nbn™ connection box or the cables relocated, contact your service provider. They should be able to advise you of the cost and arrange for a technician to move the equipment.
How do I know if my modem is NBN compatible?
If you can see a phone jack labelled VDSL, or if it says ‘ADSL2+/VDSL’ on the label with the serial number, it means your modem is ready for the NBN. Yay! If you can’t see anything like that anywhere on your modem, chances are you’ll be needing a new one to connect to the NBN.
Do all routers work with all modems?
Most routers are compatible with the majority of modems, but there are key differences that may prevent you from connecting with certain models. Before you can understand which modems work with which routers, take a look at our in-depth guide to router compatibility and how they work.
Can you just plug in a new modem?
Step 2: Connect Your New Modem Use the power cord that came with the new modem to plug the modem into an electrical outlet and wait for the modem to finish powering on completely. This usually takes about five minutes, but it may take up to 20 minutes if your modem needs a firmware update.
Is a router the same as a modem?
Router: What’s the Difference? Your modem is a box that connects your home network to the wider Internet. A router is a box that lets all of your wired and wireless devices use that Internet connection at once and also allows them to talk to one another without having to do so over the Internet.
How do I get internet without a modem?
Yes you can connect to internet without a modem if your internet service provider gives you connectivity through Ethernet or WiFi. There are some local providers who just drop an ethernet cable which you can connect to your system or they let you connect to their wireless access points.
How do I know if I have FTTP or FTTC?
To find out if you can get high-speed fibre broadband via FTTP, use an FTTP checking tool. You’ll find these on an ISP’s website to let you quickly check if FTTP has been rolled out to your area. If not, FTTC is probably the best alternative (unless you live in rural areas).
Is FTTC vdsl2?
fast standard and the VDSL2 standard currently used to deliver FTTC services to end users. … FTTC uses more optical fibre than fibre to the node (FTTN) but still relies on the existing copper line for a final connection to a home or business.
Do I need a technician to install my NBN?
You’ll need a power source that’s within 1.5m of the modem so your phone and internet can work on the nbn. If you don’t have a power point where you want the nbn connection installed, you’ll need to get a licenced electrician to install one for you.
Does FTTC need connection box?
Do I need any equipment to connect to FTTC? FTTC uses existing copper-wiring, so you’ll use the same phone line that you may be already using for your current internet connection. An nbn technician will need install equipment inside and outside of your home.
Can you just buy a router and have internet?
Buying a router won’t give you internet access. You need a provider to get that. The provider will have to bring their cable into your apartment. … Some providers allow you to use your own router, but if you don’t know much about how the internet works, you’re better off using the provider’s router.
Is FTTC any good?
FTTP was considered the best nbn™ connection due to its superior speed. … Due to the small amount of copper required, reducing the risk of speed degradation, “NBNCo says future FTTC upgrades will be able to achieve speeds of up to 1Gbps, or ten-times faster than the current maximum NBN speed”, according to WhistleOut.